Home  |  Ade's 96 GT  |  Corey's 89 LX  |  My Mods  |  Racing Clips  |  Links  |  4-Sale  |  Misc Stuff

These are the Mods that took place in
2002

scat6.jpg 59.34 Kb 9/17/2001 12:06:59 PM 640 x 480	scat5.jpg 64.73 Kb 9/17/2001 12:07:04 PM 640 x 480	scat4.jpg 63.94 Kb 9/17/2001 12:07:08 PM 640 x 480
scat3.jpg 64.38 Kb 9/17/2001 12:07:12 PM 640 x 480	scat2.jpg 62.34 Kb 9/17/2001 12:07:17 PM 640 x 480	scat1.jpg 60.55 Kb 9/17/2001 12:07:21 PM 640 x 480
ross9.jpg 41.56 Kb 8/31/2001 11:55:24 AM 640 x 480	ross8.jpg 36.23 Kb 8/31/2001 11:55:20 AM 640 x 480	ross7.jpg 31.10 Kb 8/31/2001 11:55:18 AM 640 x 480
ross6.jpg 49.74 Kb 8/31/2001 11:55:16 AM 640 x 480	ross5.jpg 45.81 Kb 8/31/2001 11:55:12 AM 640 x 480	ross4.jpg 34.78 Kb 8/31/2001 11:55:09 AM 640 x 480
ross3.jpg 44.56 Kb 8/31/2001 11:55:06 AM 640 x 480	ross2.jpg 52.39 Kb 8/31/2001 11:55:03 AM 640 x 480	ross1.jpg 48.35 Kb 8/31/2001 11:55:00 AM 640 x 480
oliver6.jpg 57.88 Kb 9/17/2001 12:06:30 PM 640 x 480	oliver5.jpg 64.43 Kb 9/17/2001 12:06:26 PM 640 x 480	oliver4.jpg 62.53 Kb 9/17/2001 12:06:18 PM 640 x 480
oliver3.jpg 63.56 Kb 9/17/2001 12:06:14 PM 640 x 480	oliver2.jpg 62.10 Kb 9/17/2001 12:05:46 PM 640 x 480	oliver1.jpg 61.95 Kb 9/17/2001 12:06:22 PM 640 x 480

These are the Mods that took place in
2001

10.21.01
Here are a few pics of the Rack & Pinion install.

Here a few of the mods waiting to go on the car over the next few weeks. Click on the pics to check the progress of the install.

Bump Stear to go along with my new Flaming River Rack and Stearing Shaft

Brand new shinny stearing shaft.

The long over due ignition upgrade is going to happen this year.

Can never have too much traction.

These are going to replace my stock lower control arms.

160lb injectors and a Pro-M 117mm MAF should make for some more boost.

  These are the Mods that took place in
2000

Updated Pics 7/6/2000

Just got back from the engine builder with some new pics!

Hi Res Pictures Below

Updated Pics 7/8/2000

Swung by Flow Tech again today and found that Bird made some more progress.

Here are some more updated pics from today.

Hi Res Picture Below

Updated Pics 7/11/2000

Engine is getting close. Front dress is complete.

Look for dyno pics soon!

Updated Pics 7/12/2000

Engine is ready to go on the dyno!

All Pics are High Res.

Update 7/20/2000

Had some back luck durring breakin on the dyno. Walked 3 cam bearings. Motor had to come apart.

Update 8/3/2000

Motor made it thourgh dyno session with a peak of 950 Horsepower! Below is a very crude graph of HP vs. TQ

We found that the 80mm ProM MAF was a huge restriction and choked boost to only 18psi @ 7250rpm

8/5/200

Motor is going into the car...Finally!